Wago Din Rails; Spacing; Figure 23: Spacing; Table 35: Wago Din Rails - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
5.3.2

WAGO DIN Rails

WAGO carrier rails meet the electrical and mechanical requirements shown in the
table below.

Table 35: WAGO DIN Rails

Item No.
210-112
210-113
210-197
210-114
210-118
210-198
210-196
Observe the mounting distance of the DIN rail when the load is increased!
With increased vibration and shock load, mount the DIN rail at a mounting
distance of max. 60 mm.
5.4

Spacing

The spacing between adjacent components, cable conduits, casing and frame
sides must be maintained for the complete fieldbus node.

Figure 23: Spacing

The spacing creates room for heat transfer, installation or wiring. The spacing to
cable conduits also prevents conducted electromagnetic interferences from
influencing the operation.
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Description
35 × 7.5; 1 mm; steel; bluish, tinned, chromed; slotted
35 × 7.5; 1 mm; steel; bluish, tinned, chromed; unslotted
35 × 15; 1.5 mm; steel; bluish, tinned, chromed; slotted
35 × 15; 1.5 mm; steel; bluish, tinned, chromed; unslotted
35 × 15; 2.3 mm; steel; bluish, tinned, chromed; unslotted
35 × 15; 2.3 mm; copper; unslotted
35 × 8.2; 1.6 mm; aluminum; unslotted
Mounting 75
Manual