Disclaimer - WAGO 750-8207 Manual

22 Important Notes
Clean only with permitted materials!
Clean soiled contacts using oil-free compressed air or with ethyl alcohol and
leather cloths.
Do not use any contact spray!
Do not use any contact spray. The spray may impair contact area functionality in
connection with contamination.
Do not reverse the polarity of connection lines!
Avoid reverse polarity of data and power supply lines, as this may damage the
devices involved.
Avoid electrostatic discharge!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge when touched. Please observe the safety precautions
against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the
devices, please ensure that environmental factors (personnel, work space and
packaging) are properly grounded.
2.3

Disclaimer

The "PFC200 CS 2ETH RS 3G" controller (750-8207) also communicates via the
mobile communications network. Please note that the mobile communications
services used by the controller may be affected by faults in the service provider's
network. Such faults are beyond the control of WAGO Kontakttechnik GmbH &
Co. KG.
WAGO Kontakttechnik GmbH & Co. KG therefore rejects any guarantee for the
execution of the commands transmitted by/to the controller.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G