Security Settings" Page; Tls Configuration" Group; Table 112: "Security Settings" Wbm Page - "Tls Configuration" Group - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
7.8.1.38

"Security Settings" Page

The network security settings are found on the "Security Settings" page.

7.8.1.38.1 "TLS Configuration" Group

Table 112: "Security Settings" WBM Page – "TLS Configuration" Group
Parameters
TLS configuration
Click on [Submit] to accept the changes. The changes will be effective
immediately.
BSI Technical Guidelines TR-02102
The rules for the "Strong" setting are based on technical guidelines TR-02102 of
the German Federal Office for Information Security.
You can find the guidelines on the Internet at:
"Publications" > "Technical Guidelines."
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Explanation
Here you can set what TLS versions and
cryptographic methods are allowed for HTTPS.
The Webserver allows TLS 1.0,
TLS 1.1 and TLS 1.2, as well as
Standard
cryptographic methods that are
no longer considered secure.
The Webserver only allows TLS
Version 1.2 and strong
algorithms.
Strong
Older software and older
operating systems may not
support TLS 1.2.
https://www.bsi.bund.de
Commissioning 161
>
Manual