General Target System Settings; Codesys Visualization; Figure 101: General Target System Settings - WAGO 750-8207 Manual

266 Run-time System CODESYS 2.3
8.11

General Target System Settings

Figure 101: General Target System Settings

No change to the settings is necessary on the "General" tab.
The "Update unused I/Os" box can be checked for initial startup. Enabling this
results in a higher CPU load and possibly a significant effect on task processing.
</dg_
8.12

CODESYS Visualization

CODESYS Web visualization is based on Java technology. All Java programs
require a Java runtime environment (JRE), which must be installed on the host
PC along with an Internet browser. An applet is stored in the file system of a Web
server and is accessible to browsers via an HTML page.
You create all visualization types (HMI and Web visualization) with the same
CODESYS graphic editor. Select the visualization type in the "Target system
settings" window. A description file in XML format is generated from the
information for each of these pages. You can find these files in the subfolder
"visu" of the CODESYS installation path. The HTML home page "webvisu.htm"
and the Java archive "webvisu.jar" in the applet (webvisu.class) are also saved
there in a compressed format.
Once you have selected a visualization type, the following steps must be
performed to execute the technique:
1. Click the "Resources" tab and open the "Target system settings." Specify
whether you wish to have visualization displayed as a "Web visualization"
using an Internet browser.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G