WAGO I/O System 750
750-482/000-001 2AI 4-20mA HART NAMUR NE43
8
Operating Modes
The HART I/O module can be used with various operating modes depending on
connection and parameterization.
Table 31: Overview of Operating Modes
Operating Mode
"2 AI + ..."
6-Byte Mailbox
1 HART variable
per channel
2 HART variables
per channel
3 HART variables
per channel
4 HART variables
per channel
Acyclic PROFIBUS services
See Table "Compatibility List" in the Section "Device Description"
*)
Table 32: Designation of Operating Modes in WAGO-I/O-CHECK
Up to Version 3.17.1.17
2 AI + acyclic PROFIBUS services
2 AI + 1 HART variable per channel
2 AI + 2 HART variables per channel
2 AI + 3 HART variables per channel
2 AI + 4 HART variables per channel
2 AI + 6-Byte Mailbox *
On fieldbus
coupler/controller
All compatible
fieldbus couplers/
controllers
*)
750-88x and
750-820x
Ethernet TCP/IP
fieldbus controller
PROFIBUS DP/V1
fieldbus coupler
750-333 or fieldbus
coupler 750-833
Version 3.17.1.18 or higher
2AI+opt. DVP1 (HART tool routing via
PROFIBUS DP-V1)
2[AI+1HV] (1 HART value per channel)
2[AI+2HV] (2 HART value per channel)
2[AI+3HV] (3 HART value per channel)
2[AI+4HV] (4 HART value per channel)
2AI+Mailbox (HART communication via
function blocks)
Operating Modes
Application
1) With
"WagoLibHART_05.lib"
PLC library
2) With Modbus
TCP/HART Gateway
(759-359)
3) With HART dynamic
variables
4) With PROFIBUS/HART
Gateway (759-360)
Manual
Version 1.0.2
49