Operating Elements; Operating Mode Switch; Codesys 2 Runtime System; E!Runtime Runtime System - WAGO 750-8207 Manual

44 Device Description
3.5

Operating Elements

3.5.1

Operating Mode Switch

Figure 18: Mode Selector Switch

The function of the mode selector switch depends on the activated runtime
system (CODESYS 2 or e!RUNTIME).
3.5.1.1

CODESYS 2 Runtime System

</dg_

Table 16: Mode Selector Switch

Item
RUN
STOP
RESET
</dg_
Other functions can also be initiated using the reset button.
3.5.1.2

e!RUNTIME Runtime System

</dg_

Table 17: Mode Selector Switch

Position
RUN
STOP
RESET
</dg_ Other functions can also be initiated using the reset button.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Activation Function
Normal mode
Latching
CODESYS 2 application runs.
Stop
Latching
CODESYS 2 application stopped.
Reset warm start or
Reset cold start
Spring-return
(based on the duration of activation, see Section
"Starting" > "Initiating Reset Functions")
Actuation Function
Normal operation
Latching
e!RUNTIME applications running.
Stop
Latching
All e!RUNTIME applications have stopped.
Reset warm start or
Reset cold start
Spring-return
(depending on length of actuation, see Section
"Starting" > "Initiating Reset Functions")
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G