Figure 51: Target System Settings (1); Figure 52: Target System Settings (2) - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
Click on [OK]. The "Target system settings" configuration window then
3.
opens.

Figure 51: Target System Settings (1)

4. To accept the default configuration for the fieldbus controller click [OK].
The "New component" window opens.

Figure 52: Target System Settings (2)

Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Run-time System CODESYS 2.3 223
Manual