Firmware Backup" > "Auto Update Feature" Submenu; Firmware Backup" > "Destination" Submenu; Table 158: "Package Server" > "Firmware Backup" > "Auto Update Feature; Table 159: "Package Server" > "Firmware Backup" > "Auto Update Feature - WAGO 750-8207 Manual

194 Commissioning
7.8.4.8.2 "Firmware Backup" > "Auto Update Feature" Submenu
This submenu contains a setting option for the Auto Update function.
The submenu only appears if the data for the firmware backup has been
selected.
Table 158: "Package Server" > "Firmware Backup" > "Auto Update Feature" Menu
Menu Item
0. Back to ...
1. No
2. Yes
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
You are taken to the following submenu after making the selection.
7.8.4.8.3 "Firmware Backup" > "Destination" Submenu
This submenu contains a selection option for the backup destination drive.
Table 159: "Package Server" > "Firmware Backup" > "Auto Update Feature" Menu
Menu Item
0. Back to ...
1. SD Card
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
The copy progress is displayed during the backup process.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
750-8207 PFC200 CS 2ETH RS 3G
Explanation
Back to the higher-level menu
The Auto Update function is OFF for the selected
data.
The Auto Update function is ON for the selected
data.
Explanation
Back to the higher-level menu
The selected data is copied to the memory card.
WAGO-I/O-SYSTEM 750