Changing An Ip Address Using The "Cbm" Configuration Tool Via The Serial Interface; Figure 31: Cbm Starting Screen - WAGO 750-8207 Manual

86 Commissioning
7.3.2 Changing an IP Address Using the "CBM" Configuration
Tool via the Serial Interface
You can also assign a new IP address to the ETHERNET interfaces X1 and X2
using the "CBM" configuration tool provided on the Linux
information about "CBM" is given in the Section "Configuration."
1. Link a PC to the X3 serial interface using a terminal program.
2. Log in to the Linux
The user name and the password are provided in the Section "Users and
Passwords" > "Linux
3. Start the configuration tool by entering the command "cbm" on the
command line and then press [Enter].

Figure 31: CBM Starting Screen

Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
750-8207 PFC200 CS 2ETH RS 3G
®
system as a "super user."
®
User Group."
WAGO-I/O-SYSTEM 750
®
console. More