Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
7.8.1.30
"Configuration of DNS Service" Page
The settings for the DNS service are shown on the "Configuration of DNS
Service" page.
7.8.1.30.1 "DNS Service" Group
Table 90: WBM "Configuration of DNS Service" Page – "DNS Service" Group
Parameter
Service active
Mode
Static hosts
New static host
Click on [Submit] to accept the changes. The changes will be effective
immediately.
Click on [Add] to accept a new assignment. The change is effective immediately.
Click on [Delete] to delete an existing assignment. The change is effective
immediately.
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Explanation
You can enable/disable the DNS server service
here.
Select here the operating mode of the DNS server:
Requests are buffered to optimize
Proxy
throughput.
Relay
All requests are routed directly.
This displays the static assignments of IP addresses
to names. If no assignment was defined, "No static
hosts configured" is displayed.
Enter here a new static assignment, e.g.,
"192.168.1.20:hostname."
You can enter 10 assignments.
Commissioning 147
Manual
Advertisement
Chapters
Table of Contents
Troubleshooting
