Table 308: Description Of Configuration Scripts For "Ports And Services" - "Ssh/Tftp - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
Table 308: Description of Configuration Scripts for "Ports and Services" – "SSH/TFTP"
Parameters Status Call-Up
SSH
SSH Server
SSH
TFTP
TFTP Server
TFTP
<
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
read get_ssh_config state
get_ssh_config root-
read
access-state
get_ssh_config
read
password-request-state
get_ssh_config port-
read
number
config_ssh
write
state=<Value>
config_ssh port-
write
number=<Value>
config_ssh root-access-
write
state-value=<Value>
config_ssh password-
write request-state-
value=<Value>
read get_tftp_config state
get_tftp_config
read
download-dir
config_tftp
write
state=<Value>
config_tftp download-
write
dir=<Value>
Appendix 391
Output/Input
Read the status of the SSH port.
Possible return values:
- enabled
- disabled
Indicates whether logon as root is
permitted.
Possible return values:
- enabled
- disabled
Indicates whether authentication
by password (instead of PKI key
files) is permitted.
Possible return values:
- enabled
- disabled
Specifies the SSH port
Activate/Deactivate SSH service.
Possible entries for <Value>:
- enabled
- disabled
Set the SSH port
Permit/Prohibit logon as root.
Possible entries for <Value>:
- enabled
- disabled
Permit/Prohibit authentication by
password.
Possible entries for <Value>:
- enabled
- disabled
Read the status of the TFTP port.
Possible return values:
- enabled
- disabled
Read the TFTP main directory.
Activate/Deactivate TFTP port.
Possible entries for <Value>:
- enabled
- disabled
Set the TFTP main directory.
Valid
Right
away
Right
away
Manual