Figure 92: Internal Data Bus Synchronization 01 - WAGO 750-8207 Manual

256 Run-time System CODESYS 2.3
internal data bus and the output values are also set at the module after each
CODESYS task.

Figure 92: Internal Data Bus Synchronization 01

CTI:
CT:
KBZ:
Example:
CODESYS task interval (CTI): 100 µs
I/O module cycle (KBZ): 2000 µs
Result: Matching of the CODESYS task interval to the I/O module cycle of 2000
µs.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
CODESYS Task Interval
CODESYS Task that accesses the I/O module of the internal data bus
Internal Data Bus Cycle
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G