Supplementary Power Supply Regulations; Figure 29: Power Supply Concept; Table 36: Filter Modules For 24 V Supply - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
6.2.2

Supplementary Power Supply Regulations

The WAGO-I/O-SYSTEM 750 can also be used in shipbuilding or offshore and
onshore areas of work (e. g. working platforms, loading plants). This is
demonstrated by complying with the standards of influential classification
companies such as Germanischer Lloyd and Lloyds Register.
Filter modules for 24 V supply are required for the certified operation of the
system.

Table 36: Filter Modules for 24 V Supply

Order No.
750-626
750-624
Therefore, the following power supply concept must be absolutely complied with.

Figure 29: Power Supply Concept

Use a supply module for equipotential bonding!
Use an additional 750-601/ 602/ 610 Supply Module behind the 750-626 Filter
Module if you want to use the lower power jumper contact for equipotential
bonding, e.g., between shielded connections and require an additional tap for this
potential.
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Name Description
Supply Filter Filter module for system supply and field supply
(24 V, 0 V), i. e. for fieldbus coupler/controller and bus
power supply (750-613)
Supply Filter Filter module for the 24 V field supply
(750-602, 750-601, 750-610)
Connect Devices 81
Manual