Information" > "Number Of Tasks" Submenu; Information" > "Project Details" Submenu; Information" > "Tasks" Submenu; Table 122: "Plc Runtime" > "Information" > "Number Of Tasks" Submenu - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
7.8.4.3.5 "Information" > "Number of Tasks" Submenu
In this submenu, the number of tasks in the PLC program are displayed.
The submenu only appears when CODESYS 2 is enabled as the runtime system.
Table 122: "PLC Runtime" > "Information" > "Number of Tasks" Submenu
Parameters
Number of Tasks
To return to the higher-level menu, press [Q] or [Return].
7.8.4.3.6 "Information" > "Project Details" Submenu
In this submenu, project information from the PLC program is displayed.
The submenu only appears when CODESYS 2 is enabled as the runtime system
and the program is executed.
Table 123: "PLC Runtime" > "Information" > "Project Details" Submenu
Parameters
Date
Title
Version
Author
Description
To return to the higher-level menu, press [Q] or [Return].
7.8.4.3.7 "Information" > "Tasks" Submenu
In this submenu, tasks from the PLC program are displayed. An entry is
generated for each task.
The submenu only appears when CODESYS 2 is enabled as the runtime system.
Table 124: "PLC Runtime" > "Information" > "Tasks" Submenu
Menu Item
0. Back to ...
n. Task n
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Explanation
The number of tasks in the PLC program is shown.
Explanation
Display of project information that the programmer
entered in the PLC program (in the programming
software under Project > Project Information ...)
Descriptive text with up to 1024 characters is
displayed under "Description".
Explanation
Back to the higher-level menu
Opens a submenu with information on the selected
task
Commissioning 171
Manual