Tcp/Ip" > "Dns Server" Submenu; Networking" > "Ethernet" Submenu; Table 139: "Networking" > "Tcp/Ip" > "Dns Server" Submenu; Table 140: "Networking" > "Ethernet" Submenu - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
7.8.4.4.9 "TCP/IP" > "DNS Server" Submenu
This submenu contains the settings for the DNS server.
Table 139: "Networking" > "TCP/IP" > "DNS Server" Submenu
Menu Item
0. Back to ...
n. DNS Server n
(n+1). Add new DNS
Server
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
7.8.4.4.10 "Networking" > "Ethernet" Submenu
This submenu contains other submenus with settings for the ETHERNET
configuration.
Table 140: "Networking" > "Ethernet" Submenu
Menu Item
0. Back to ...
1. Switch Configuration
2. Ethernet Ports
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Submenu Item / Explanation
Back to the higher-level menu
The addresses of the defined DNS servers are
displayed. Other submenus are available for the
server entered.
0. Back to ... Back to the higher-level menu
You can change the selected DNS
1. Edit
server address.
You can delete the selected DNS
2. Delete
server address.
Add additional DNS server addresses.
You can enter 10 addresses.
Explanation
Back to the higher-level menu
Opens a submenu with settings for the IP
address(es)
Opens a submenu with settings for the ETHERNET
interfaces
Commissioning 179
Manual