Plc Runtime" Menu; Plc Runtime" > "Information" Submenu; Table 117: "Plc Runtime" Menu; Table 118: "Plc Runtime" > "Information" Submenu - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
7.8.4.3

"PLC Runtime" Menu

This menu contains other submenus with information and settings for the runtime
system.

Table 117: "PLC Runtime" Menu

Menu Item
0. Back to ...
1. Information
2. General Configuration
3. WebVisu
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.4.3.1 "PLC Runtime" > "Information" Submenu
This submenu contains other submenus with information on the runtime system
and PLC program.
Menu items 2 ... 6 only appear if CODESYS 2 is set as the runtime system.
Table 118: "PLC Runtime" > "Information" Submenu
Menu Item
0. Back to ...
1. Runtime Version
2. Webserver Version
3. State
4. Number of Tasks
5. Project Details
6. Tasks
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Explanation
Back to the higher-level menu
Opens a submenu with information on the runtime
system
Opens a submenu with settings for the runtime
system
Opens a submenu with settings for the Web
visualization
Explanation
Back to the higher-level menu
Opens a submenu to display the runtime version
Opens a submenu to display the Webserver version
Opens a submenu to display the PLC operating
state
Opens a submenu to display the number of tasks in
the PLC program
Opens a submenu to display the PLC program
project information
Opens a submenu to display the tasks in the PLC
program
Commissioning 169
Manual