General Configuration" > "Plc Runtime Version" Submenu; General Configuration" > "Home Dir On Sd Card" Submenu173; Table 127: "Plc Runtime" > "General Configuration" > "Plc Runtime Version; Table 128: "Plc Runtime" > "General Configuration" > "Home Dir On Sd Card - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
7.8.4.3.10 "General Configuration" > "PLC Runtime Version" Submenu
In this submenu, select which PLC runtime system is enabled.
Table 127: "PLC Runtime" > "General Configuration" > "PLC Runtime Version" Submenu
Menu Item
0. Back to ...
1. None
2. CODESYS 2
3. e!RUNTIME
All data is deleted when switching the runtime system!
The runtime system's home directory is completely deleted when switching the
runtime system!
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.4.3.11 "General Configuration" > "Home Dir On SD Card" Submenu
In this submenu, define if the home directory for the runtime system should be
moved to the memory card.
Table 128: "PLC Runtime" > "General Configuration" > "Home Dir On SD Card" Submenu
Menu Item
0. Back to ...
1. Enable
2. Disable
Insert a memory card before switching the home directory!
When moving the home directory to the memory card, insert a memory card
formatted to support file system. Only the first partition of a memory card can be
accessed at /media/sd and can be used as the home directory.
Perform a reset before switching the home directory!
Stop IEC-61131 applications in use before switching the home directory of the
runtime system.
Restore the device to its initial state using the "Reset" function. Any boot project
is deleted.
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Explanation
Back to the higher-level menu
No runtime system is enabled.
The CODESYS 2 runtime system is enabled.
The e!RUNTIME runtime system is enabled.
Explanation
Back to the higher-level menu
The home directory is moved to the memory card.
The home directory is stored in the internal memory.
Commissioning 173
Manual