Table of Contents
Advertisement
146 Commissioning
7.8.1.29
"DHCP Configuration" Page
The settings for the DHCP service are shown on the "DHCP Configuration" page.
7.8.1.29.1 "DHCP Configuration Xn" Group
Table 89: WBM "DHCP Configuration" – "DHCP Configuration Xn" Group
Parameter
Service active
IP Range
Lease time (sec)
Static hosts/
Static host n
New static host
Click on [Submit] to accept the changes. The changes will be effective
immediately.
Click on [Add] to accept a new assignment. The change is effective immediately.
Click on [Delete] to delete an existing assignment. The change is effective
immediately.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
750-8207 PFC200 CS 2ETH RS 3G
Explanation
Enable or disable the DHCP service for the interface
Xn.
Enter here a range of available IP addresses.
Specify the lease time here in seconds. 120
seconds are entered by default.
This displays the static assignments of MAC IDs to
IP addresses. If no assignment was defined, "No
static hosts configured" is displayed.
Enter here a new static assignment, e.g.,
"01:02:03:04:05:06=192.168.1.20" or
"hostname=192.168.1.20."
You can enter 10 assignments.
WAGO-I/O-SYSTEM 750
Advertisement
Chapters
Table of Contents
Troubleshooting
