Information" > "Network Details" Submenu; Table 116: "Information" > "Network Details" Submenu - WAGO 750-8207 Manual

168 Commissioning
7.8.4.2.2 "Information" > "Network Details" Submenu
In this submenu, the network and interface properties of the controller are
displayed.
If the EHERNET interfaces are operated in "Switched" mode, a common table
("X1/X2") is displayed for both connections.
If the EHERNET interfaces are operated in "Separated" mode, an individual table
("X1" / "X2") is displayed for each connection.
Table 116: "Information" > "Network Details" Submenu
Parameters
State
Mac Address
IP Address
Subnet Mask
To return to the higher-level menu, press [Q] or [Return].
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
750-8207 PFC200 CS 2ETH RS 3G
Explanation
Status of the ETHERNET interface
(enabled/disabled)
MAC address identifies and addresses the controller
Current IP address of the controller and (in brackets)
the reference type (static/bootp/dhcp)
Current subnet mask of the controller
WAGO-I/O-SYSTEM 750