Figure 73: Call-Up To Add To The Program Module - WAGO 750-8207 Manual

238 Run-time System CODESYS 2.3
4. Add the program module PLC_PRG that you have just created (see
Section "Editing the Program Modules"). To do this, right-clock on the
"Clock" symbol and in the contextual menu select "Attach program call-up".
Then, click the [...] button and [OK].

Figure 73: Call-up to Add to the Program Module

5. Compile the example program by selecting Project > Rebuild all in the
context menu.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G