WAGO 750-8207 Manual page 304

304 MODBUS – CODESYS 2
Table 215: Diagnostics for the Error Server
Diagnostics
ID
0x00090006
0x00090007
0x00090008
0x00090009
0x0009000A
0x0009000B
0x0009000C
0x0009000F
0x00090100
0x00090101
0x00090102
0x00090103
0x00090104
0x00090105
0x00090106
0x00090107
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Diagnostic text Method of
saving
Modbus Slave Permanent
UDP start failed
Modbus Slave Temporary
UDP terminated
Modbus Slave Temporary
RTU started
Modbus Slave Permanent
RTU start failed
Modbus Slave Temporary
RTU terminated
Modbus Slave Temporary
data exchange
started by PLC
Modbus Slave Temporary
data exchange
stopped by PLC
Modbus Slave Permanent
PLC watchdog
timer expired
Modbus Slave Permanent
common
configuration
failed.
Modbus Slave Temporary
TCP configured
successfully.
Modbus Slave Permanent
TCP configuration
failed.
Modbus Slave Temporary
UDP configured
successfully
Modbus Slave Permanent
UDP configuration
failed.
Modbus Slave Temporary
RTU configured
successfully.
Modbus Slave Permanent
RTU configuration
failed
Port for Modbus Permanent
Slave RTU
operation not free.
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
Explanation
Starting the MODBUS slave in
UDP mode failed.
MODBUS slave UDP mode
successfully terminated.
MODBUS slave successfully
started in the RTU mode.
Starting the MODBUS slave in
RTU mode failed.
MODBUS slave RTU mode
successfully terminated.
MODBUS slave data
exchange started.
MODBUS slave data
exchange stopped.
Monitoring time for controller
(PLC) expired.
MODBUS slave configuration
failed.
MODBUS slave TCP
configuration completed
successfully.
MODBUS slave TCP
configuration failed.
MODBUS slave UDP
configuration completed
successfully.
MODBUS slave UDP
configuration failed.
MODBUS slave RTU
configuration completed
successfully.
MODBUS slave RTU
configuration failed.
Serial port for MODBUS slave
RTU configuration already
occupied.