Host/Domain Name" > "Hostname" Submenu; Host/Domain Name" > "Domain Name" Submenu; Networking" > "Tcp/Ip" Submenu; Table 132: "Networking" > "Hostname" Submenu - WAGO 750-8207 Manual

176 Commissioning
7.8.4.4.2 "Host/Domain Name" > "Hostname" Submenu
In this submenu, you can set the hostname of the controller.
Table 132: "Networking" > "Hostname" Submenu
Parameters
Enter new Hostname
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
7.8.4.4.3 "Host/Domain Name" > "Domain Name" Submenu
In this submenu, you can set the domain name of the controller.
Table 133: "Networking" > "Host/Domain Name" > "Domain Name" Submenu
Parameters
Enter new Domain Name
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
7.8.4.4.4 "Networking" > "TCP/IP" Submenu
This submenu contains other submenus with the TCP/IP settings for the
ETHERNET interfaces.
Table 134: "Networking" > "TCP/IP" Submenu
Menu Item
0. Back to ...
1. IP Address
2. Default Gateway
3. DNS Server
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
750-8207 PFC200 CS 2ETH RS 3G
Explanation
Enter here the hostname of the controller to be used
if the network interface is changed to a static IP
address or if no hostname is transmitted with a
DHCP response.
Explanation
Enter the domain name.
The default entry is "localdomain.lan".
Explanation
Back to the higher-level menu
Opens a submenu with settings for the IP
address(es)
Opens a submenu with settings for the default
gateway
Opens a submenu with settings for the DNS
server(s)
WAGO-I/O-SYSTEM 750