Figure 80: Debugging (Case 5); Figure 81: Debugging (Case 6) - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
As soon as a task is located at a breakpoint, only all other tasks can be controlled
with the mode selector switch.
Exception: If the mode selector switch is on STOP, the debug task is also no
longer processed.

Figure 80: Debugging (Case 5)

Figure 81: Debugging (Case 6)

Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Run-time System CODESYS 2.3 243
Manual