320 Diagnostics
12.1.3
Fieldbus/System Indicating Elements
Figure 117: Indicating elements for fieldbus/system
Table 225: Diagnostics via SYS LED
Status
Green
Yellow
Yellow flashing
Green/red
flashing
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Explanation
Ready to operate -
System start
completed without
errors
Device is in
startup/boot process
and the RST button is
not pressed.
"Fix IP Address"
mode,
temporary setting
until the next reboot
Firmware update
mode
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
Remedy
---
---
Connect to the device via the standard
address (192.168.1.17) or restart the
device to restore the original value set.
---