System Partition" Page; Current Active Partition" Group; Set Inactive Partition Active" Group - WAGO 750-8207 Manual

Pfc200 cs 2eth rs 3g plc - controller pfc200
Table of Contents

Advertisement

136 Commissioning
</dg_
7.8.1.21

"System Partition" Page

The settings for specifying the partition that the system will be started from are
shown on the "System Partition" page.

7.8.1.21.1 "Current Active Partition" Group

The partition currently in use is displayed here.

7.8.1.21.2 "Set Inactive Partition Active" Group

Click [Activate Partition] to start the system from a different partition at the next
controller reboot.
Ensure bootable partition!
A functional firmware backup must be present in the boot partition!
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G

Advertisement

Table of Contents
loading

Table of Contents