Busdiag.lib; Mod_Com.lib; Sercomm.lib; Table 296: Input Variable "Devicenumber - WAGO 750-8207 Manual

378 Appendix
15.2.1.6

BusDiag.lib

The controller 750-8207 supports the following function blocks of the
"BusDiag.lib" library:
- DiagGetBusState
- DiagGetState
The document containing a description of this library and the function blocks it
includes is available for download on the Internet at www.wago.com.
The values for the input variables "DEVICENUMBER" of the "DiagGetBusState"
and "DiagGetState" functions are based on the particular device and bus system
and are as follows for the controller "PFC200 CS 2ETH RS 3G" (750-8207):

Table 296: Input Variable "DEVICENUMBER"

Bus System
Internal data bus
MODBUS
15.2.1.7

mod_com.lib

The controller 750-8207supports the following function blocks of the
"mod_com.lib" library:
- ADD_PI_INFORMATION
- CRC16
- FBUS_ERROR_INFORMATION
- GET_DIGITAL_INPUT_OFFSET
- GET_DIGITAL_OUTPUT_OFFSET
- KBUS_ERROR_INFORMATION
- MOD_COM_VERSION
- PI_INFORMATION
- SET_DIGITAL_INPUT_OFFSET
- SET_DIGITAL_OUTPUT_OFFSET
- SLAVE_ADDRESS
The document containing a description of this library and the function blocks it
includes is available for download on the Internet at www.wago.com.
15.2.1.8

SerComm.lib

The controller 750-8207supports the following function blocks of the
"SerComm.lib" library:
- SERCOMM
- SERCOMM_VERSION
The document containing a description of this library and the function blocks it
includes is available for download on the Internet at www.wago.com.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
750-8207 PFC200 CS 2ETH RS 3G
Value
0
1
WAGO-I/O-SYSTEM 750