Plc Runtime Services" > "Codesys 2" Submenu; Table 181: "Ports And Services" > "Plc Runtime Services" > "Codesys - WAGO 750-8207 Manual

208 Commissioning
7.8.4.11.16 "PLC Runtime Services" > "CODESYS 2" Submenu
This submenu contains the settings for the CODESYS 2 service.
Table 181: "Ports and Services" > "PLC Runtime Services" > "CODESYS 2" Submenu
Menu Item
0. Back to ...
1. Webserver
enable/disable
2. Communication
enable/disable
3. Communication Port
Number
4. Port Authentication
enable/disable
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
750-8207 PFC200 CS 2ETH RS 3G
Submenu Item / Explanation
Back to the higher-level menu
Enable or disable the Webserver for the CODESYS
web visualization.
0. Back to ... Back to the higher-level menu
1. Enable The Webserver is enabled.
2. Disable The Webserver is disabled.
Enable or disable the communication between the
CODESYS 2 runtime system and the CODESYS 2
programming system.
0. Back to ... Back to the higher-level menu
1. Enable Communication is enabled.
2. Disable Communication is disabled.
Enter here the port number for communication with
the CODESYS 2 programming system. The default
value is 2455.
Enter here whether a login is required for connecting
to the device.
0. Back to ... Back to the higher-level menu
1. Enable Authentication via login is required.
2. Disable Authentication is not required.
WAGO-I/O-SYSTEM 750