WAGO 750-8207 Manual page 382

382 Appendix
Table 300: Description of the Configuration Scripts for "Networking - TCP/IP"
Parameters Status Call
Default Gateway 1
Default
Gateway
Default
Gateway
Default
Gateway
Default Gateway 2
See "Default Gateway 1." When calling the gateway number, replace 1 with 2.
DNS Server 1
DNS Server 1
DNS Server 2 ... n
See "DNS Server 1." When calling, adjust the server number (2 ... n).
Add DNS Server
Add DNS server write
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
get_default_gateway_
read
config number=1 state
config_default_gateway
write number=1
state=<stateval>
get_default_gateway_
read
config number=1 value
config_default_gateway
write
number=1 value=<gw>
get_default_gateway_
read
config number=1 metric
config_default_gateway
write
number=1 metric=<n>
read get_dns_server 1
edit_dns_server
dns-server-nr=1
write/
change=change
change
dns-server-
name=<Value>
edit_dns_server
write/
dns-server-nr=1
delete
delete=delete
edit_dns_server
add=add dns-server-
name=<Value>
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
Output/Input
Current status of the default
gateway 1.
Possible return values:
- enabled
- disabled
Possible entries for <Value>:
- enabled
- disabled
Current IP address of the default
gateway 1
Enter the IP address of the
default gateway 1 here.
<gw> is an IP address with the
format "Number. Number.
Number. Number."
Current metric (cost factor) of the
default gateway 1
The default value is "20."
Enter the metric of the default
gateway 1 here.
<n> is a number between "0" and
"4.294.967.295."
DNS server address with the
consecutive number 1
Set the address of the DNS
server with 1 as the consecutive
number.
<Value> is an IP address with the
format
"Number.Number.Number.Numbe
r."
Delete the DNS server with the
consecutive number 1.
Add additional DNS addresses
here.
<Value> is an IP address with the
format
"Number.Number.Number.Numbe
r."
Effecti
ve
Immedia
tely
Immedia
tely
Immedia
tely
Immedia
tely
Immedia
tely