Software Uploads" Page; Upload New Software" Group; Activate New Software" Group; Table 75: Wbm "Software Uploads" Page - "Upload New Software" Group - WAGO 750-8207 Manual

138 Commissioning
</dg_
7.8.1.23

"Software Uploads" Page

The settings for a device update are shown on the "Software Uploads" page.

7.8.1.23.1 "Upload New Software" Group

Table 75: WBM "Software Uploads" Page – "Upload New Software" Group
Parameter
Software Files
To select a file on the PC, click the [Browse] button.
To transfer the selected file to the controller, click [Start Upload] button.

7.8.1.23.2 "Activate New Software" Group

Table 76: WBM "Software Uploads" Page – "Activate New Software" Group
Parameter
Software File
Action
To perform the action, click the [Submit] button. The process starts immediately.
The file with the software package is deleted again after the installation is
completed or when the controller is restarted.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
750-8207 PFC200 CS 2ETH RS 3G
Explanation
You can select fieldbus software, program licenses
and update scripts, for example, for transfer from a
PC to the controller.
Explanation
This shows the file name of the transferred software
package. If no new uploaded software package is
present on the controller, the message "No upload
file exists" is displayed.
Select here the action required.
Activate The transferred software package is
activated.
Force Installs a transferred software package
(Manual that cannot be activated with "Activate."
reboot Required for activating a controller
afterward reboot.
s needed) The software package is activated on
reboot.
Discard The transferred software package is
(delete deleted again by the controller.
upload)
WAGO-I/O-SYSTEM 750