82
Commissioning
8.1.1
Software Interface
To display the node on the PC, connect both using the USB communication
cable and launch WAGO-I/O-CHECK.
The node is displayed.
Figure 17: WAGO-I/O-CHECK User Interface, Node with I/O Module (Example)
Right-click on the picture of the I/O module and select the [Settings] menu item.
The "3-Phase Power Measurement Module" dialog opens:
Manual
Version 1.0.0
WAGO I/O System 750 XTR
750-495/040-010 3-Phase POM 20KV 300A XTR