Ports And Services" > "Iocheck Port" Submenu; Ports And Services" > "Modbus Tcp" Submenu; Table 177: "Ports And Services" > "Iocheck Port" Submenu; Table 178: "Ports And Services" > "Modbus Tcp" Submenu - WAGO 750-8207 Manual

206 Commissioning
7.8.4.11.12 "Ports and Services" > "IOCHECK PORT" Submenu
This submenu contains settings for the WAGO-I/O-CHECK port.
Table 177: "Ports and Services" > "IOCHECK PORT" Submenu
Menu Item
0. Back to ...
1. State
2. Firewall status
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.4.11.13 "Ports and Services" > "Modbus TCP" Submenu
This submenu contains the settings for the MODBUS TCP service.
Table 178: "Ports and Services" > "Modbus TCP" Submenu
Menu Item
0. Back to ...
1. State
2. Firewall status
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
750-8207 PFC200 CS 2ETH RS 3G
Submenu Item / Explanation
Back to the higher-level menu
Enable/disable the WAGO-I/O-CHECK port.
0. Back to ... Back to the higher-level menu
The WAGO-I/O-CHECK port is
1. Enable
enabled.
The WAGO-I/O-CHECK port is
2. Disable
disabled.
Opens a submenu with firewall settings for the this
service for the interfaces
Submenu Item / Explanation
Back to the higher-level menu
Disable or enable the MODBUS/TCP service.
0. Back to ... Back to the higher-level menu
The MODBUS TCP service is
1. Enable
enabled.
The MODBUS TCP service is
2. Disable
disabled.
Opens a submenu with firewall settings for the this
service for the interfaces
WAGO-I/O-SYSTEM 750