Rtc Module; Dali/Dsi Master Module; Table 281: Rtc Module 750-640; Table 282: Dali/Dsi Master Module 750-641 - WAGO 750-8207 Manual

Pfc200 cs 2eth rs 3g plc - controller pfc200
Table of Contents

Advertisement

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
Output Process Image
Offset
0
1
2
3
4
5
*)
Cyclic process image (Mailbox disabled)
**)
Mailbox process image (Mailbox activated)

15.1.5.10 RTC Module

750-640
The RTC Module has a total of 6 bytes of user data in both the Input and Output
Process Image (4 bytes of module data and 1 byte of control/status and 1 byte ID
for command). The following table illustrates the Input and Output Process
Image, which have 3 words mapped into each image. Word alignment is applied.

Table 281: RTC Module 750-640

Input and Output Process Image
Offset
0
1
2

15.1.5.11 DALI/DSI Master Module

750-641
The DALI/DSI Master module has a total of 6 bytes of user data in both the Input
and Output Process Image (5 bytes of module data and 1 byte of control/status).
The following tables illustrate the Input and Output Process Image, which have 3
words mapped into each image. Word alignment is applied.

Table 282: DALI/DSI Master Module 750-641

Input Process Image
Offset
0
1
2
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Byte Destination
High Byte
reserved
D1
D3
D5
C3
C1
Byte Destination
High Byte
ID
D1
D3
Byte Destination
High Byte
D0
D2
D4
Low Byte
C0
reserved
D0
D2
Process data*) / Mailbox**)
D4
D6
Control byte C3
C2
Control byte C1
Low Byte
C/S
Command byte
D0
D2
Low Byte
S
DALI Response
D1
Message 3
D3
Message 1
Appendix 365
Description
Control byte C0
Process data*) /
reserved**)
Control byte C2
Description
Control/status
byte
Data bytes
Description
Status byte
DALI Address
Message 2
Manual

Advertisement

Table of Contents
loading

Table of Contents