WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
7.8.4.12.4 "SNMP" > "SNMP v3 Configuration" Submenu
This submenu contains settings for SNMP v3.
Table 188: "SNMP" > "SNMP v3 Configuration" Submenu
Parameters
0. Back to ...
(n). Username
(n + 1). Add new v3 User
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Explanation
Back to the higher-level menu
Opens a submenu with information on the selected
v3 user and to delete the user
Opens a series of submenus to create a new v3
user
You can enter 10 users.
The following entries/selections are possible:
•
Authentication name (max. 32 characters, no
spaces)
•
Authentication type (None/MD5/SHA)
•
Authentication key (min. 8 characters, max. 32
characters, no spaces)
•
Privacy type (None/DES/AES)
•
Privacy key (min. 8 characters, max. 32
characters, no spaces)
•
IP address for a trap receiver for v3 traps
Commissioning 213
Manual