7.1.1.4.6 "Information" Menu Item; Table 31: Monitoring Menu Item - WAGO 750-496 Manual

WAGO-I/O-SYSTEM 750
750-496 8AI 0/4-20mA S.E.

Table 31: Monitoring Menu Item

Option
Process value overview
Channel
Measured value
Process value (dec)
Process value (hex)

7.1.1.4.6 "Information" Menu Item

This area provides an overview of the specifications for the I/O module used. You
obtain information about the following points:
• Article number
• Description
• Software version
• Hardware version
Description
Display of the bus channel
Display of the calibrated input current in milliamps (mA).
This is a 32-bit value.
If the channel is deactivated, "N/A" (not available) is displayed.
The measured value is read cyclically from the I/O module.
Display of the process value in decimal notation.
If the channel is deactivated, "N/A" (not available) is displayed.
The process value is read cyclically from the I/O module.
Display of the process value in hexadecimal notation.
If the channel is deactivated, the process value (hex) "0x7FFF" is
displayed.
The process value is read cyclically from the I/O module.
Commissioning 61
Manual
Version 1.2.2