Thermal Switch; Removing The Thermal Switch Unit - Canon ImageRunner iR8500 Series Service Manual

Chapter 10
[1]
5) Remove the screw [1], and detach the sub thermistor [2].
10.5.7.2 Removing the Sub Thermistor
/ iR85+ / iR8070
1) Slide out the fixing assembly.
2) Remove the fixing web and the oil pan.
3) Remove the fixing harness cover.
4) Disconnect the connector [1] and remove the screw [2]; then, detach
the sub thermistor assembly [3].
[1]
5) Remove the screw [1], and detach the sub thermistor [2].
10-28
[2]
[3]
F-10-68
[2]
[1]
F-10-69
0008-8200
[2]
[3]
F-10-70

10.5.8 Thermal Switch

10.5.8.1 Removing the Thermal Switch Unit

iR105i/iR105+ / iR9070
1) Remove the fixing assembly.
2) Remove the fixing web; then, remove the 2 screws [1] and the oil pan
[2], and detach the fixing harness cover [3].
[1] [2]
3) Remove the faston [1], and remove the 2 screws [2]; then, detach the
electrode assembly [3] and the thermal switch holder [4].
[3] [2]
4) Remove the 4 screws [1], and detach the thermal switch unit [2].
[2]
[1]
F-10-71
0007-2880
[1]
[3]
F-10-72
[1] [4] [2]
F-10-73