5) Open the ADF fully.
6) Remove the 3 screws [1], and slide the reader rear
cover [2] toward the rear to detach.
Take care not to damage the ADF open/closed
sensor arm [3].
[3]
[1]
F-5-124
5.4.11.2 Removing the Cooling
Fan
1) Disconnect the connector [1], and remove the 2
screws [2]; then, detach the cooling fan [3].
[1]
[2]
F-5-125
[2]
[1]
0003-3129
[3]
5.4.12 Scanner Drive Cable
5.4.12.1 Outline
Be sure to keep the following on hand when replacing
the scanner drive cable:
mirror positioning tool
5.4.12.2 Removing the
Copyboard Glass
1) Open the ADF.
2) Remove the 2 screws [1], and detach the right glass
retainer [2]; then, detach the copyboard glass [3].
[3]
F-5-126
When detaching the copyboard glass, take care not
to touch the white plate attached to its back. (Soiling
can cause lines in the image). If soiled, clean it using
lint free paper moistened with alcohol.)
Chapter 5
0004-1353
0004-1355
[1]
[2]
5-43