Replacing Waste Toner Box - Toshiba e-STUDIO330AC Quick Start Manual

Chapter 3 MAINTENANCE

Replacing Waste Toner Box

If a message is displayed on the touch panel informing you that the waste toner box needs replacing, follow the procedures
below.
1
Open the front cover.
2
Turn the green lever to the unlock position.
3
Take out the waste toner box straight toward
you pushing down the top latch. Put the used
waster toner box in the plastic bag the new
one was contained in and seal it with
adhesive tape.
46
4
Turn the 4 green levers to the lock position.
5
Take out the green cleaner inside the cover.
6
Insert the cleaner through the service hole of
the developer under the arrow to the end.