Toner Cartridge Detection Sensor (S8, S9, S10, S11) - Toshiba e-STUDIO2330C Service Manual

13.5.20 Toner cartridge detection sensor (S8, S9, S10, S11)

(1) Take off the toner motor assembly.
 P.13-31 "13.5.18 Toner motor assembly"
(2) Disconnect 1 connector, and then release
the latch to take off the Toner cartridge
detection sensor.
13.5.21 Ozone filter-1
(1) Remove 1 screw, and then take off the ozone
filter-1.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Toner cartridge detection sensor
Connector
Fig. 13-67
Fig. 13-68
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
13 - 33
Ozone filter-1
DEVELOPER UNIT
13