Replacing The Waste Toner Box (Color Models / E-Studio5008Lp Series) - Toshiba e-Studio2000AC Hardware Troubleshooting Manual
E-studio5005ac series;
e-studio5008a series;
e-studio5008lp series.
multifunctional digital colog system /
multifunctional digital systems.
Hide thumbs
Also See for e-Studio2000AC:
- Printing manual (174 pages) ,
- Software installation manual (164 pages) ,
- Copying manual (132 pages)
Table of Contents
Advertisement
Replacing the Waste Toner Box (Color Models / e-STUDIO5008LP Series)
0.
When the waste toner box becomes full, the symbol for replacement of the waste toner box blinks and the message
"Dispose of used toner" appears. Replace the waste toner box following the procedure below.
Never attempt to incinerate waste toner boxes.
Dispose of used toner cartridges and waste toner boxes in accordance with local regulations.
Open the front cover of the equipment.
1
Put your fingers in the waste toner box front grooves and take it out toward you pushing down
2
the top latch.
Never attempt to incinerate waste toner boxes.
Dispose of used toner cartridges and waste toner boxes in accordance with local regulations.
3
Place the waste toner box on a large sheet so as not to dirty the floor.
Do not place the waste toner box with its collecting port face down.
The waste toner may spill out from the box's collecting port.
82 Replacing the Waste Toner Box (Color Models / e-STUDIO5008LP Series)
Hide quick links:
Advertisement
Table of Contents
