9.5.5
Bypass pickup roller
(1)
Take off the bypass roller unit.
P.9-12 "9.5.4 Bypass roller unit"
(2)
Take off the bypass pickup roller and the
shaft.
9.5.6
Bypass feed roller
(1)
Take off the bypass roller unit.
P.9-12 "9.5.4 Bypass roller unit"
(2)
Remove 1 clip. Then pull out the shaft.
(3)
Take off the bypass feed roller.
9.5.7
Bypass paper sensor (S8)
(1)
Remove 1 screw on the bottom of the
equipment.
(2)
Take off the bypass paper sensor with the
bracket.
e-STUDIO182/212/242
PAPER FEEDING SYSTEM
Shaft
Bypass pickup roller
Shaft
Bracket
© 2009 TOSHIBA TEC CORPORATION All rights reserved
9 - 14
Fig. 9-18
Bypass feed roller
Clip
Fig. 9-19
Fig. 9-20