Messages Displayed On The Touch Panel - Toshiba e-STUDIO330AC Hardware Troubleshooting Manual

Messages Displayed on the Touch Panel

0.
A message appears on the upper part of the screen to notify users of a problem, etc. The major examples of problems
and how to solve them are described in the table below.
Message
Close *** cover.
Misfeed in ***
Install new *** toner cartridge
*** Toner Not Recognized
Check the toner cartridge
Check paper size setting on
control panel for drawer N.
Check the direction or size of
the paper.
Wait (Performing Self-check)
Adjusting. Wait until printing
resumed.
Time for cleaning. Open the
front cover and follow the
guidance.
Check the original and set it
again
Change direction of original
Problem Description
The cover indicated by *** is
open.
Paper misfeed has occurred
inside the equipment.
No toner is left. (For color
models, "***" indicates the
applicable color.)
(The colors are shown
abbreviated when two or more
toners are running out: Y:
yellow, M: magenta, C: cyan and
K: black)
The toner cartridge indicated by
*** is not installed at all or
improperly so.
The terminal of the toner
cartridge is stained.
The recommended toner
cartridge is not being used.
Paper misfeed has occurred
because of the mismatch
between the paper size placed
in drawer N and the size
registered for the drawer N in
the equipment.
The equipment is undergoing
maintenance to keep its
imaging quality.
The equipment is going through
an adjustment which is
necessary to maintain the
temperature and image quality.
The main charger, LED print
head or slit glass needs
cleaning.
The original is misfed inside of
the DSDF.
The direction or the size of the
original placed on the DSDF is
incorrect.
The orientation of the original
placed on the original glass is
incorrect.
Corrective Action
Check the cover on the touch panel and close
it.
Remove the misfed paper following the
guidance displayed on the touch panel.
 P.16 "Clearing a Paper Misfeed"
See the color indication on the touch panel
and replace the toner cartridge.
(For color models, about another 50 copies
can be made after this message appears. The
number varies depending on the conditions
of copying.)
 P.34 "Replacing a Toner Cartridge"
Install the toner cartridge correctly.
 P.34 "Replacing a Toner Cartridge"
Wipe the terminal with a soft cloth.
Use the recommended toner cartridge.
 P.34 "Replacing a Toner Cartridge"
Just removing the misfed paper does not
prevent another paper from being misfed. Be
sure to correctly register the paper size in the
equipment.
 P.27 "Clearing paper misfeeds caused by a
wrong paper size setting"
Wait until the adjustment is completed and
the message disappears.
This message may continue being displayed
for approx. 2 minutes. Wait until the
adjustment is completed and printing is
resumed.
Clean the main charger, LED print head and
slit glass.
 P.42 "Cleaning the Inside of the
Equipment"
Remove the misfed original following the
guidance on the touch panel.
 P.19 "DSDF"
Check the direction and the size of the
original and then replace it on the DSDF. Then
reattempt the operation.
Change the orientation of the original by 90
degrees and place it on the original glass.

Messages Displayed on the Touch Panel 11