Dip Sw, Led, Vr, And Tp Tables; Dip Sw Table (On The Main Board) - Ricoh C211 Service Manual

3. DIP SW, LED, VR, AND TP TABLES

3.1 DIP SW TABLE (ON THE MAIN BOARD)

No. DIP SW Function
1 DPS101 Not Used
Thermal Head
2 DPS102-1 Test
Dither Matrix
Selection
3 DPS102-2
Skip Paper
Feed Setting
DPS103-1
4
DPS103-2
Initial Full
Master Check
5 DPS103-3
Initial Print
6 DPS103-4
Beeper
7 DPS103-5
ON/OFF
Security
Function
8 DPS103-6
9 DPS103-7 Key Counter
On Line
10 DPS103-8
Reduction
DPS104-1
Ratio
11 DPS104-2
Compensation
DPS104-3
12 DPS104-4 Not Used
13 DPS104-5 Not Used
Auto Class
14 DPS104-6
Reduction
15 DPS104-7 Ratio Selection
Class/Memory
16 DPS104-8 Selection
C224
Remarks
Turn off to access test pattern mode.
(Refer to the Thermal Head Test,
section 4.4)
Turn off to select the 6 x 6 dither
matrix. (Image will be lighter if the 6 x 6
dither matrix is selected.)
ON: 4 x 4
OFF: 6 x 6
Select the number of drum rotations
between every print when the Skip
Paper Feed mode is selected. (See the
skip paper setting table on the next
page.)
If this switch is on, when the main
switch is turned on, masters in the
master eject box are compressed once
to check if the master eject box is full.
ON: Make two prints after making
a master.
OFF: Make one print after making
a master.
Turn on to sound the beeper.
If this switch is on, prints cannot be
made without making a new master
after the main switch is turned off and
on.
Turn on after installing the key counter.
Turn on after installing the option
controller.
Used to adjust the reduction ratio in the
sub-scan direction. (Refer to Image
Magnification in the Sub-Scan
Direction Adjustment. section 5.1.9)
If this switch is on, in Memory/Class
mode, the next job will start 5 seconds
after the previous job is finished even if
the tape marker is not installed.
Select the reduction ratio setting.
ON: 93%, 75%, 64%.
OFF: 93%, 82%, 71%.
Select class or memory function.
ON: Memory
OFF: Class
4-6
Factory Setting
OFF
ON
ON
DPS103-1: OFF
DPS103-2: OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
A4 version: OFF
LT version: ON
ON
SM