Ricoh C211 Service Manual page 535

DESIGNATED AREA CHECK MODE : SS950
The command sheet image (designated area) and the original image can be
the same time to check the designated area and the positioning of the image
designated area as follows:
1)
2)
3)
4)
5)
Turn off the power switch.
Turn on the power switch while pressing the Make-up Key and the Reset Key.
Auto Cycle
I
ml
@3+-
Lower Combine 20rioinals
I
Press the Make-up Key ([Fn] is displayed in the counter.)
Press the "8" key ("8" is displayed in the counter.)
printed at
within the
2
11-~
II
l/— II -Ii
~!=a=!e-
1 11/ Proof
111(
Print Start
n Ill
Turn on the power
switch while pressing
these keys.
Press the
"8"
key.
Set the command sheet and the original on the original table and
press
the
Print
Start
key to make copies.
* If white paper is used as an original, only the command sheet (the line showing
the designate area) is printed.
4-15