4. Paper Feed Miss
e Phenomenon>
4-5.
During the initial print operation, paper misfeed occur at the second feed roller.
(Especially rough paper or thin paper.)
e Possible causes>
1.
The
clearance
between
the
paper
detecting
arm
[A] and the printing
pressure
ON/OFF
Lever [B] is too
small; therefore, the paper detecting
arm [A] can not rotate, and paper is
stopped by the paper detecting pin
[C]. When the printing speed is fast,
the paper misfeeds
the paper detecting
due to vibrations.
[cl
/
do not occur, as
arm [A] can rotate
e Countermeasure>
1.
Adjust the clearance as shown below.
[N
B]
6-17
Rev. 8189