Ricoh C211 Service Manual page 620

4. Paper Exit Sensors
[cl
[D]
@'
1) Remove the delivery belts.
2)
Remove the magnet plates [A] (2 screws each).
3) Remove the wing guides [B] (1 screw each).
4) Remove the belt rollers [C] (2 E-rings each), then remove the tapes [D] from
the vacuum guide plate.
5) Remove the vacuum guide plate [E] (6 screws).
6) Unplug the sensor connectors (3P) [F].
7) Remove the paper exit sensors [G] (2 screws each).
5-80