Ricoh C211 Service Manual page 634

4. Paper Feed Miss
< Phenomenon>
4-1. When paper is set, E-02 is displayed in the counter.
< Possible causes>
1. The paper table does not rise or rises
at a lower speed than usual, this is be-
cause the allen screw for the worm
gear of the paper table drive motor is
loose.
Allen Screw
<
1.
Countermeasure >
Tighten the allen screw. Confirm that
there is no resistance for the paper
feed table drive motor by raising and
lowering the paper feed table manual-
ly. If necessary, lubricate the worm
gear with grease.
—
6-12