Ricoh C211 Service Manual page 18

No.
Name Function
1, ADF Unit
(VT2300/2500)
2. ADF Unit Open
Button
(VT2300/2500)
3. Original
Guides
4. Original Table
5. Original Table
Release Lever
6. Feed Roller
Pressure Lever
7. Separation Roller
Pressure Lever
8. Paper Feed Side
Plate
9, Paper Feed Table
10. Side Plate Fine
Adjusting Dial
11. Front Door
12. Paper Delivery Table
13. Operation Panel
14. ADF On/Off Select
Switch
(VT2300/2500)
15. Original Tray
Feeds the original to the printing position
automatically.
Use to open the ADF unit.
Adjust these guides to position the originals
correctly.
Place the originals on this table.
Use to open the original table unit to the left for
master installation.
Use to adjust the contact pressure of the paper
feed roller according to paper thickness. '------
Use to adjust the separation roller pressure to
prevent double feed.
Use to prevent paper skew.
Set the paper on this table.
Use to shift the paper feed table sideways.
Open for access to the inside of the machine.
Completed prints are delivered here.
Operator controls and indicators are located here.
When setting originals one sheet at a time, set this
switch to the Off position.
Originals used to make a master are delivered to
this tray.
1-5