Ricoh C211 Service Manual page 644

5. Image Trouble
< Phenomenon>
5-8. Only the edge of the image is printed as shown below.
* The image density decreases.
* This phenomenon occurs either partially or over the whole image.
Normal
Abnormal
<
Possible causes> c Countermeasure>
1.
The scanner harness is faulty. 1-1. Repair the faulty section of the scan-
ner harness or replace the scanner'
harness.
< Phenomenon>
5-9. The image is reduced towards the original feed direction.
In some case the image is reduced partially.
< Possible causes> < Countermeasure>
1.
The original is incorrectly transported 1. Replace the stepping motor.
because the stepping motor is faulty.
6-22