Ricoh C211 Service Manual page 208

Component
Condition Phenomenon
Znd Original Sensor
ON condition
When the main switch is turned on, the jam
+
indicators "A" and ~
(Not interrupted) im
blink and reset is
.
The original is not inserted automatically, and the
+
jam indicators "A" and ~
blink when the
Master Making key is pressed
(VT21 00/21 30/21 50).
OFF condition The original is fed when the Master Making key is
(Interrupted) pressed, but the leading edge of the original is
damaged because the original transport motor
%
fails to turn on. The 'A" an$ jam indicators
blink (VT2300/VT2500).
3riginal Registration
ON condition
After the master making process is finished, the
Sensor
(Not interrupted)
+
Jam indicators "A" and ~ blink.
The original is fed until the leading edge of the
OFF condition original goes 5 cm past the exposure glass, then
(Interrupted) jam indicators "A" and ~~ blink.
Vlaster Eject Switch After the master is ejected and one sheet of
(Sensor) ON condition paper (trial print) is delivered, the jam indicators
(Not interrupted) "F" and ~~ blink and reset is impossible.
OFF condition
When the master is being ejected, the jam
(Interrupted) %
indicators "F" and ~ blink.
%essure Plate
ON condition
The pressure plate does not go up. After one
'osition Switch
(Feeler is
sheet of paper (trial rint) is delivered, the
indicators "FWand /'
u
blink.
actuated)
OFF condition When the main switch is turned on, the pressure
(Feeler is not plate keeps moving up and down.
actuated)
%11Master Detecting ON condition When the master eject box is full, the indicators
Switch
(Feeler is 'F" and fi do not blink.
actuated)
OFF condition After master ejecting is finished, the indicators 'F"
(Feeler is not and fi blink.
actuated)
'aper Table Lower ON condition The paper table does not go down.
.imit Sensor (Interrupted)
OFF condition When the paper feed table goes down and stops,
(Not interrupted) the cover open indicator blinks.
'aper Table Safety ON condition When the main switch is turned on, the cover
Switch
(Feeler is open indicator blinks.
actuated)
OFF condition If paper table
lower limit sensor is faulty, the
(Feeler is not paper table moves all the way down and locks.
actuated)
7-2