Ricoh C211 Service Manual page 516

INSTALLATION PROCEDURE
(Color
Drum Unit)
1.
2.
3.
4.
5.
6.
7.
Remove the protection sheet wrapped
around the drum unit.
Remove the retaining tape from the ink
holder.
Stick a color indicator seal which is the
same color as the ink on the drum case
and the ink holder.
Replace the drum unit installed in the
machine with the color drum unit.
(1) Leave the master wrapped around
the removed drum to protect the
drum from dust and drying.
(2) Keep the removed drum unit in the
drum case.
Install the color drum unit.
* While this color drum is installed,
the color drum indicator @ lights
on the operation panel.
Install the color ink.
(1) Remove the cap of the ink cartridge.
(2) Insert the
balder.
Idling
ink cartridge into the ink
(1) Press the
tion panel
-----950.
Press the Idling key -----830.
Reset key on the opera-
while pressing the "O" key
(2) If ~ + D blink on the operation
panel, operate the above procedure
again.
Protection
Sheet
k Holder
I
3-1o